Pokemon Fire Red Cheats – Gameshark Codes, Game Boy Advance

2,288 thoughts on “Pokemon Fire Red Cheats – Gameshark Codes, Game Boy Advance”

1. I noticed that the wild pokemon cheats modifier does not work on retroarch, I have not tried out the other ones yet so it might just be for that cheat or it is that all cheats just don’t work on retroarch, also I am using it on hakchi and I am also playing it on the snes classic.

   Reply

   • Hello Dman, welcome! Some cheats do work on RetroArch, but during my testing I also noticed that certain cheats fail to work properly. If you mainly want to use cheats, I recommend using VBA or mGBA instead, as they tend to have better cheat compatibility.

     Reply

2. do these cheats work on online websites

   Reply

   • Hi Jake. No, these cheats won’t work properly when played on websites. I highly recommend using GBA emulators.

     Reply

3. Can I ask a favor? If yes, can someone share a complete fame checker cheat because it’s hard to complete in reality and cause I’m curious about it, can you make it? Thank you in advance.

   Reply

   • Hello there, pal. Sorry but we don’t have that kind of cheat at the moment.

     Reply

4. Is there a code that gives you a shiny starter.

   Reply

   • You can activate the shiny cheat right before receiving your starter Pokemon and it will become shiny.

     Reply

5. So I was messing around one night and decided to use the encounter legendary pokemon cheat with a level cheat (i used mewtwo, lvl 90) but every time I got an encounter my game crashed- while also crashing the whole emulator. I realized it was because I typed in the level cheat wrong. I would restart the emulator, disable all cheats, load my save, and enable them again (not the incorrect level one), otherwise I would crash on load, and finally grab a lvl 2 mewtwo :pp using firered v1.0 US english, on Myboy! android

   Reply

6. This is PikachuAndZekrom2010 when I did the infinite money cheat it didn’t work and turned one of my pokemon into a bad egg

   Reply

7. Do you have a cheat that you can get all The TM/HM’s at once? It’s ok If no

   Reply

8. Will there ever be a cheat code that lets you decide if a wild Pokémon is holding an item? I’ve been trying for half an hour to get a Dragonair to come with Dragon Fang and nothing has worked so far.

   Reply

9. these cheats dont work on GBApokemon game emulator.
   any other way to add cheats on this site ??

   Reply

   • Hi Luganyn, Use a real GBA emulator such as MyBoy or Delta if you want to use cheats and not a web-based emulator as it has limited capabilities.

     Reply

10. Exp share doesnt work for either version 1.0 or 1.1 and i have tried them on both

    Reply

11. I tried several cheats and they worked. I tried them one by one. The items I received via cheats or regular gameplay do not show up anymore in the bag.
    What can I do to fix this?
    I play on iGBA on iPhone

    Reply

12. Hi, respectively asking… please reply… the in battle ability modifier code… once the move changes and battle ends does the move also vanishes or gets replaced by original move or it stays… and will the move be there even if the cheat turns off after triggering the change… kindly help

    Reply

13. How does one revive the other Fossil if you use the cheat to get both? The Lab guy in Cinnabar keeps denying me when I try to revive the other.

    Reply

14. I’m a little confused on the wild encounter for the 1.1 version of Fire Red, I know it’s says “To fix the issue and to encounter another Pokemon of your choice, you have to delete all the cheats, save game progress, exit the game, and reopen the game again” my question is if I were to reopen the game again and put whatever Pokemon I want to encounter do I have to like reset the whole thing again or does it go back to normal and I can just continue catching Pokemon that I want to catch specifically.
    P.S: I am slightly new to this 1.0 and 1.1 update, I haven’t played Pokemon fire red and leaf green in quite a while now.

    Reply

    • Hi there, Alexander, Welcome! No worries, that’s a very good question, especially if you’re new to using cheats on FireRed.

      Here’s how it works in simple terms: After you delete all cheats, save your game, close the emulator, and reopen it, your game will return to normal. That means wild encounters will go back to default (random Pokemon).

      If you want to catch another specific Pokemon, you can just enter a new Wild Pokemon modifier cheat again. You don’t need to reset your whole game. Just repeat the process:

      1. Activate the cheat for the Pokemon you want
      2. Encounter and catch it
      3. Disable or delete the cheat after

      If you notice the same Pokemon keep appearing or something feels off, just do the refresh steps again (disable cheats -> save -> restart emulator). Take it slow and use one cheat at a time to avoid issues. Hope my answer helps.

      Reply

15. The in-battle move ability cheat doesn’t work. I’ve tried all 4 slots and none of them change the move to dragon dance. And yes im using a 1.0 version of fire red.

    Reply

    • Hi there!
      Guys, I remember they had a code so that, when using a TM, Protect for example, it would change into any attack I wanted. That’s how I got my Charizard with Thunder Punch; now I want to change certain attacks But the code is nowhere to be found. It’s strange, the code is identifiable I need help with one they have in Esmeralda. I promise you that I already did it once, otherwise I wouldn’t have x99 TM from Protect

      Reply

16. Your new cheat code for spawning pokemon doesn’t work correctly. 83007CEE 0004
    33007CF0 0006
    33007CF1 001F
    33007CF2 0002
    33007CF3 0017
    This code should spawn a male Charmander, lvl 6 with perfect IV’s and Jolly nature. Well its spawning everything correct expect the nature. First attempt i got naughty nature, second attempt I got Adamant.

    Reply

17. Hello, I’ve been trying to use the masterball codes and it never works for me, what am I doing wrong? i use version 1.0 and I applied the mastercode too. My emulator is mGBA on pc and it even recognizes the cheat but in-game even post reset it doesn’t work. Any ideas?

    Reply

    • Hey Oliver, welcome! There are two ways to get a Master Ball using cheats. The first is by receiving it from the PC, and the second is by buying the first item in the Poke Mart buy list. Just choose the method that works best for you.

      mGBA handles cheats quite well, especially if you’re using version 1.0 of the game. When adding the code, I recommend selecting “Autodetect” in the code type option. In my experience with mGBA, choosing the other cheat types sometimes causes the cheat to fail, though I’m not exactly sure why.

      Reply

18. I love the cheat for new pokemon modifier for 1.0, where you can choose pokemon, level, gender, max Iv, and nature, however I’ve noticed that the gender and nature don’t work at all. I’ve tried the majority of the nature codes just to check and each time it’s still random nature.
    Over 85 Alakazams and still no modest nature..(the RNG hates me)

    Reply

19. Hi, how to use the shiny code? I’ve tried all 3 code for the modified pokemon. Can you help me? Many thanks

    Reply

    • If you use v1.1 it’s
      1A2B80ED 222B0D7C
      65439170 93645A77

      Action replay

      Reply

      • Yeah, this one works well for v1.1! Thanks for coming here, Félix.

        Reply

20. Hey @PokeCoder ! What’s the Fire Red 1.1 code for Exp. Share item? Send me an email if you can :)

    Reply

    • Hey Trix, welcome here. Unfortunately, we don’t have the cheat code for EXP Share yet for 1.1.

      Reply

21. For the wild encounter the gender and nature modifiers don’t seem to be working. I’m using a delta doesn’t work on the ultraviolet rom hack or FireRed (US) Squirrels.

    Reply

22. Hey, are pokemon caught with the wild modifier not meant to evolve?

    Reply

    • Depends, pokemon outside of kantodex will not evolve until you have the national dex; so example, a chikorita won’t evolve into Bayleef until you unlock national dex from Oak.

      Reply

23. Idk why but my Pokémon start disobeying me at a low lvl. Does anyone know why this happens or what i can do to fix it ?

    Reply

    • Same happened to me

      Reply

24. Shiney code won’t work on fire red v1.1 on the delta iOS emulator?

    Also is there any more codes to use for v1.1the list is not great compared to v1.0

    Reply

    • Hey Hoss, welcome. Unfortunately we don’t have many cheats for V1.1 and that includes the shiny Pokemon Encounter. Majority of the cheats here work for V1.0.

      Reply

25. Hello just wanted to say that for some reason the shiny pokemon code that has a star emoji on it makes the pokemons receive a boost on the exp. Just wanted to know why this happens because it makes my pokemon gain too much levels and disobey me and that kinda bothers me. Anyways i appreciate whoever take their time to post the cheats and respond the questions

    Reply

    • Also seeing this. Sad but that’s what we get for using cheats.

      Reply

26. what type of cheat Is that one on websites where it just asks for code and description no kinds of things like action replay or GameShark codes. I want to get some rare candy’s to level up my Pokemon.

    Reply

    • Hello Cozmo, welcome here. If you’re using a website and not emulator to play the game, I doubt the cheat will work properly. Cheats works best on emulators that supports Action Replay, CodeBreaker or GameShark. I suggest switching to GBA emulators, there are plenty of them available. You may check our guide on Best GBA Emulators for Pokemon Gaming.

      Reply

27. None of the 3 codes for the shiny Pokémon work I tried them all and no wild Pokémon were shiny.

    Reply

    • May I know the version of FireRed you are using? We use English Pokemon games here, we haven’t tested our cheats with other languages.

      Reply

      • hello I’m using v1. 1 and i also tried v1. 0 and both of them are not working on it for shiny code

        Reply

        • That’s strange. When adding the cheat, make sure you select Auto cheat type detection. Let me know if this works for you.

          Reply

28. I’m trying to get to navel Rock. I have the mysticticket, but can’t seem to get it to work. Is there an “Event Enabler” cheat on here? I can’t find it…

    Reply

    • Hey Ben, welcome here. Sorry, but we don’t have the cheat for Event Enabler.

      Reply

29. Hi! I’d like to ask, how exactly does the complete Pokédex cheat work? Do I need to have another active cheat for it to work, or just that one? I’f it helps, I’m using fire red squirrels version.

    Reply

    • Hello Rystorm, welcome! If your emulator supports auto cheat-type detection, you can simply leave it enabled when adding the code. Otherwise, set the cheat type to CodeBreaker.

      May I also know which GBA emulator you are using? For best results, I recommend VBA or mGBA for PC, Delta for iOS, and MyBoy or John GBA for Android.

      Reply

      • I am using manic emulator, which usually doesn’t have issues with cheats— and the not working part is usually on my end. But, thanks for the clarification!

        Reply

        • No problem, I’m glad you were able to sort it out.

          Reply

      • Yo wassup pokecoder is there any mega evolution stones rough red it’s a firered hack rom game and is there any cheat code for the mega bracelet and the mega stones thank u

        Reply

        • Hey there, pal. Sorry, but we don’t have the cheat codes for those items yet.

          Reply

30. Just want to comment thanks for this website. I wanted to catch a Chancey with a lucky egg. Theres a 0.025% of getting one in the Safari Zone

    The cheat to make Chancey show up anywhere in FireRed V1.1 works but it didnt have a Lucky Egg. So I found a Lucky Egg cheat. Make sure your item storage box in your PC is empty before trying to activate the cheat and then it will show like the pictures here.

    Thank you for this resource

    Reply

    • Hello Eze, welcome to Pokemoncoders! I’m really glad to hear that the cheats are working for you and you find our website useful. Just a friendly reminder that overusing cheats can sometimes cause issues. After using several cheats, I recommend clearing your emulator’s cheat settings by disabling or deleting all cheats and then restarting the emulator. This helps prevent future glitches and keeps your game running smoothly. Have fun!

      Reply

31. None of the cheats are working for me. I have used these for Pokémon crystal and have worked perfectly, so I’m pretty sure I’m entering correctly. I’m using the delta emulator on iOS. This is the first GBA gane I try and I can’t get the cheats to work at all. I’m trying a simple shiny encounter cheat and none of the wild Pokémon are shiny at all. Any help would be greatly appreciated.

    Reply

    • Hey Mario, welcome to Pokemoncoders. Can you clarify your question? You have used Pokemon Crystal cheats for these FireRed cheats and they worked perfectly? How’s that possible? To make these work, you need to have the English of FireRed, with version 1.0 or 1.1. Can you confirm if you’re playing a Pokemon FireRed game?

      Reply

32. Can confirm that the “improved” wild Pokémon modifier doesn’t work except for Pokémon and level. Everything else doesn’t work. Tested on 1.0 multiple times with only the only cheats input and active being the master code (000014D1000A1003DAE60007) and WPM Pikachu (83007CEE0019) lvl 5 (33007CF00005) IVs 31 (33007CF1001F) gender male (33007CF20002) nature Naughty (33007CF3000D). The first encounter with Pikachu is consistently female lvl 5 IV 20-31 nature random. Subsequent Pikachus can be either male or female IV 20-31 nature random. Tested again and again. After saving with both cheats disabled, then restarting emulator, enabling, and starting the encounter; starting a new game with both cheats deleted and then added but disabled before saving then restarting emulator, enabled, and starting the encounter; starting a new game and only added the two cheats and enabled them before the encounter without saving. Only confirmed variable is the desired Pokémon, only unverified variable is the IV, consistently incorrect variables are gender and nature. Did a lot of testing and this cheat is unreliable.

    Reply

33. I can guarantee that the “improved” wild Pokémon modifier for version 1.0 does not work. It works for level and gender, but I can’t confirm its IV effectiveness and can confidently confirm it has no effect on the nature of the Pokémon. No hate, just wanted to share the facts.

    Reply

    • Upon further testing, gender is also inconsistent at best and at worst, consistently incorrect upon first encounter.

      Reply

    • For more information, I have only added/enabled two cheats: the WPM master code and WPM for Pikachu level 5 IVs 31 gender male nature naughty

      000014D1000A1003DAE60007

      83007CEE001933007CF0000533007CF1001F33007CF2000233007CF3000D

      Desired Pokémon and level are the only confirmed variables. IVs are the only variable that is seemingly trustworthy but unverified. Gender and nature are consistently random.

      Reply

34. the lightball cheat for a pikachu seems to be bugged i get bad eggs and it crashes my game when i go to my pc boxes so i had to restart over after 7 hours hof gameplay im still trying to get this light ball for my game safely

    Reply

    • Hello Antonio, welcome here. I’m really sorry that happened, losing progress after that many hours is frustrating.

      What you experienced (bad eggs, PC crashes) is a classic sign of cheat conflicts, especially with item cheats like Light Ball. This usually happens when:

      • Multiple cheats were enabled at the same time, or
      • A cheat stayed active even after being turned off.

      Here’s the safest way to proceed going forward:

      1. Disable and delete all cheats in your emulator.
      2. Save your game using in-game saving (not save states).
      3. Completely close and restart the emulator to clear leftover cheat effects.
      4. Reopen the game and enable only the Light Ball cheat by itself.
      5. Get the item (via PC or Poké Mart, depending on the cheat), then immediately turn the cheat off.
      6. Save again and restart the emulator one more time.

      Item cheats are especially sensitive and even other cheats, so never mix them with other cheats. If you follow the steps above, you should be able to obtain the Light Ball safely without triggering bad eggs again. Hope my answer helps.

      Reply

35. i tried the new Pokémon encounter cheat for version 1.0 and it doesn’t seem to be working as described.. i followed the instructions and i do get the right Pokémon, gender and LVL correct, which is great. but the last line on the cheat code for the nature doesn’t seem to work at all( not sure about IV’s either?) ive tried reloading the game and still randomizes the nature.

    not sure if any of this matters but I’m using the my boy gba Emulator(paid for) on android, and using a 1.0 version rom with no hacks,

    Reply

    • Hello Derek, welcome to Pokemoncoders. Thank you for sharing these details, they really help me troubleshoot the issue more accurately. Cheats can be quite sensitive, especially if other cheats were used before. Simply reloading the game is often not enough to clear previous cheat effects in the emulator. I recommend deleting all cheats from your emulator, then saving your game using the in-game save and completely closing the emulator.

      After that, reopen the emulator, load FireRed again, and reapply the cheat. Make sure no other cheats are enabled, only the Pokemon encounter cheat. This usually resolves the issue. Let me know how it goes 👍

      Reply

36. I wanted to know if there’s a cheat for delta fire red so I can evolve my trade evolved pokemon like Kadabra to Alakazam

    Reply

37. I’m not sure if you are responding here anymore. I am playing an emulator of FireRed on gba***. They have a place for cheats, but when I enter them in, they do not work in the game. Any thoughts on this?

    Reply

    • Hey Scooter, welcome here! Yes, I’m actually more active answering questions here than on our social media pages.

      To answer your question, I honestly don’t recommend playing on web-based platforms. While they may be convenient, they lack many important features especially proper cheat support and stability. For the best experience, I strongly suggest using an emulator instead.

      Let me know which device you’re using to play FireRed (PC, Android, or iOS), and I’ll be happy to recommend the best emulator for you.

      Reply

      • What do you recommend for fire red on delta ios

        Reply

        • Delta can perfectly run both FireRed v1.0 and V1.1. But if you want to make most of these cheats, I highly recommend finding the FireRed v1.0 or the FireRed Squirrels version.

          Reply

38. With infinite exp (or even with random pokemon) they’ll start disobeying me/ How do I stop this?

    Reply

39. I’m using the burrito edition emulator

    Reply

    • I never tried nor tested these cheats with your emulator. Can you try these cheats with popular emulators such as MyBoy, Pizzaboy, John GBA, or Delta for iOS? These cheats works best with these emulators.

      Reply

40. Wild encounter not working. Just trying to get some help with this. Would love to be able to complete the Pokédex

    Reply

    • Hey Zac, welcome here. First of all, check which FireRed version you have, whether 1.1 or 1.0 and find the appropriate Wild encounter cheat for your version. Please note that the cheat has master code and it must be added first before the main cheat. Let me know if you have questions.

      Reply

41. Playing fire red on Delta. The wild Pokémon encounter doesn’t work. Any advice. I’d like to be able to complete the Dex.

    Reply

    • Hey Zac, welcome here. Please check which FireRed version you are using—there are two: v1.0 and v1.1. Make sure you select the correct code for your version, then activate the Pokemon encounter cheat. Once added, go to the wild to trigger the encounter. Also, make sure to add the master code provided first before the main cheat. Let me know if it works for you.

      Reply

42. Why am I entering the safari zone when i use the 8 badges code?

    Reply

    • Welcome here PokeLover31, I believe that’s because the 8 badges cheat can trigger certain game events, and one of the side effects is being sent to the Safari Zone. This is a common glitch with that code. I don’t recommend using the 8 badges cheat unless you saved your game before activating it. If you still want to try it, make sure to disable the cheat right after it activates and avoid pairing it with other cheats. Hope this helps.

      Reply

      • Please use this updated code that I made:

        All Badges
        40082238 E7971F5C

        The code on here is originally by CodeJunkies and most likely only has a chance of working with the Anti-DMA code. My code uses the game’s pointer and should work regardless.

        Reply

43. Currently using an ios emulator, lucky emulator. None of the shiny versions work, Pokemon mods don’t work, the only fully functional code thus far is the all starters codes for both the fossils and starters. The trainer Pokemon steal code gives dex data, but stolen Pokemon become bad eggs.

    Reply

    • Hey Mwatts, welcome here. We haven’t tested these cheats on Lucky emulator, can you try it with Delta for iOS? These cheats work well on that emulator.

      Reply

44. Can “No Random Battles” cheat revert?

    Reply

    • Hey there, yes. Simply disable the cheat, and everything will be back to normal. If doing it won’t work, try restarting your emulator. Let me know how it goes.

      Reply

45. I cant give sapphire stone that came from pc (cheat code) to celio, any help to advance? I’m playing
    Fire red 1.0

    Reply

    • Hi, I know its been a long time but I had the same Issue and I used the PKHeX to solve it. I unclick on the Events Flag Scientist Gideon defeted and it worked

      Reply

      • Wow! Thanks for sharing this information. This surely useful to future players.

        Reply

46. Thank you for the cheat code

    Reply

    • No problem Pal, glad I could help.

      Reply

47. Does egg hatch works?

    Reply

    • Hey PoKO, welcome here. After activating the cheat, the egg will hatch after walking 5 or more steps. Unless you have a bad egg, it won’t hatch 🤣

      Reply

48. Is there any way to use the shiny pokemon code and the Pokemon modifier code at the same time? The Pokemon I try getting doesn’t appear shiny when I use them.

    Reply

    • Hey Trinidad, welcome back! Unfortunately, that won’t work. I also don’t recommend pairing one cheat with another, as it often causes glitches and other problems in the game.

      Reply

49. Cheat for instant victory?

    Reply

50. A note and warning to those using the new shiny cheat for version 1.0 – For some reason, it is changing the trainer IDs. This means Pokémon act as if traded and will not obey if you don’t have gym badges.

    Reply

51. Hello I am on v1.1 and I used the code to receive the mystic ticket but when I go to the harbor nothing is happening. Is there something else im supposed to do?

    Reply

    • Hey Jamie, welcome here. When adding the mystic ticket code, make sure to add the Master code and Anti-DMA first, or else the cheat will not work. Note that these must be added as separate cheats.

      Reply

52. This code below is not working for fire red 1.1. Are there any other nature codes that works in 1.1? I also tried this 33007CF3 0002 but it didn’t work as well. Thanks in advance.

    Example: (Adamant)
    AA3BB0ED 41CD5D95
    5EB8DEEE 692ED298

    Reply

    • Hi Jhay, welcome! Unfortunately, we haven’t found a nature modifier code for FireRed v1.1 yet. Most of the available codes work only for v1.0. Rest assured, we’re always testing and updating, so whenever we find a working code for v1.1, we’ll add it to the list right away.

      Reply

53. I’m using fire red v1.1 on mGBA in retroarch and am having trouble getting any of the wild pokemon encounter modifier cheats to work, either the game freezes or random pokemon pop up, any fix? for example when i use the code for a level 5 bulbasaur its cheat2_code = 100DAE6+0007+83007D12+0001+33007D14+0005+33007D15+001F
    Any help would be appreciated
    (yes im running master and dma too, tried both with and without it)

    Reply

    • Hello Moose, welcome to Pokemoncoders! Thanks for sharing those details—they’re really helpful for troubleshooting. It looks like you’re using the Wild Pokemon Modifier for v1.0, but since you mentioned your game is v1.1, you’ll need to use the code listed under “Wild Pokemon Modifier (For FireRed V1.1)“. Also, you don’t need the master code and DMA for the item modifier cheat—just use the master code for the Wild Pokemon Modifier along with the specific Pokemon code. So, in your case, the correct cheat code would be (Make sure the are added to the correct cheat type);

      Master code (Action Replay)
      4D83B1BF E0F5F507
      8E883EFF 92E9660D
      B6C5368A 08BE8FF4
      90B4977C C0151DC2

      Bulbasaur (Code Breaker)
      83007CEE 0001

      Reply

54. Hey I’m using pizza boy pro a pro and for the pokemon fire red v1.1 none of the wild pokemon encounters work

    Reply

    • Hey Aatir, welcome here. Since you’re using FireRed V1.1, use the codes appropriate to your version. We might not have many codes for your version, but the cheats on that list are definitely handy!

      Reply

55. Hey Team,
    Hope you are well :)

    I am trying to use the Wild Pokemon Modifier for FireRed (v1.1). I am only using the Master Code and the Pokemon I want to catch (Dragonite, literally the only cheat I will use) on MyBoy Android paid version. The pokemon appears however, every time I try I get the “Bad Egg” problem and when I actually try and throw a PokeBall to catch it, the game crashes. Is there something I’m missing? Is there a setting I need to turn on/off?

    Reply

    • Hey John, welcome here. You may need to restart your emulator with all cheats disabled. It seems your emulator is still detecting previously used cheats and keeping them active even after being disabled. This happens often with many emulators, and a restart usually fixes it.

      Reply

56. I have tried every single shiny code on this page for both ROM versions and not one of them works! Having the master and anti-dma codes on just kicks me back to the title screen if I have them on when I encounter a Pokémon! I am using Lucky Emulator on iOS and every other code from this page I’ve tried has worked fine, it’s just the shiny codes refusing to work!

    Reply

    • Hey Ray, welcome here. Sadly, we don’t test cheats on Lucky emulator so I can’t give solid answer for you, sorry. Delta Emulator is what I highly recommend as it’s popular among iOS users. I test cheats on Delta emulator, and I can guarantee these cheats work well.

      Reply

      • All the shiny codes here does not work even for Delta, all shiny pokemon caught will stop obeying after level 10. Even when the pokemon has your ID.

        Reply

57. Hey, where’s all the pokemon codes for the Wild Pokemon Modifier list? Did someone forget to put up the list?

    Reply

    • It’s all there, check the Pokemon Related Cheats section for the Wild pokemon modifier codes.

      Reply

      • Well, now I feel dumb. Thanks!

        Reply

        • No problem, thanks for joining us here. 🙂

          Reply

58. I suggest a cheat for infinite coins for the Casino

    Reply

    • Sorry, pal, but I’ve never heard of a cheat like that in FireRed.

      Reply

    • Hey there i have tried all of the pokemon modified versions to obtain pokemon that I would have to trade for or not exclusive to this version, I use pizza boy emulator and some codes work but not one wild encounter code works, I tried for US. And UK versions.

      Reply

59. Hi I am complete my Pokedex but I realize I could not get pokemon from the list above starting from Eevee and more. Other pokemon like pinsir and slowpoke I could obtain but beyond Magikarp I couldn’t. Just wanted to ask why is that.

    Reply

60. how to get cheat nature in pokemon received mod, i try 33007D53 0014 for Timid Nature but it does’nt work. Please help

    Reply

    • Hey DX, unfortunately, you can’t use the wild Pokemon modifier together with the nature modifier cheat. While it would be awesome to get your desired Pokemon with the perfect nature using cheats, sadly, combining those two won’t work. Enable only one cheat at a time and you’re good to go!

      Reply

      • So this doesn’t work any longer???

        Instructions: Add the master code first as a separate cheat. Using the example cheat code above, you can encounter a level 10 male Charizard with max IV and a modest nature. Feel free to modify and experiment with the cheat. See below for Pokemon Level ID and Nature ID Codes.

        Reply

        • Sorry for the confusion. I am referring to the other wild pokemon modifier cheat, but that one works. Just make sure you have 1.0 FireRed version, this won’t work on V1.1.

          Reply

61. Hi i cant get the all badges cheat to work. Any suggestions?

    Reply

    • Hey Adrian, the all badges cheat is very hit-or-miss. In my testing, it works on VBA emulator but fails to work on Delta or mGBA in our testing. It rarely works as intended and often causes issues when it does. I don’t recommend using it, but if you do, make sure to save your game progress first, just to be safe.

      Reply

62. Correction to list.
    Koffing is 006D
    00D6 is Heracross

    Reply

63. Question! Does the Easy Catch code not work with 1.1? I’ve tried multiple times and I can’t seem to get it working

    Reply

    • Hey Ayla, thanks for coming here. Unfortunately, the easy catch cheat only works for v1.0 and not for v1.1. We have few cheats for v1.1 that you can try.

      Reply

64. Hey Im on delta fire red on my phone and I want to evolve my kadabra or haunter without trading. Ive looked everywhere and tried different codes and methods and none of them worked. any cheat code i can use to acquire them?

    Reply

65. I have a problem, I used the wild modif for 1.1 and it didn’t let me catch it. The game thinks it’s a trainer battle. I have the master code on and I use the myboy emulator. Can you help?

    Reply

66. Hello,

    I would like to know if there is a code to have a shiny starter.
    Can anyone help ?

    Thx !

    Reply

    • Hey Kji, you can simply apply the shiny cheat before receiving your first starter Pokemon and it’ll turn into shiny. However, please note that you must have FireRed v1.0 to make it work, we don’t have the code yet for V1.1.

      Reply

67. I am using the delta emulator and when ever i try to put the master code in it. it wont work it wont make a space and even if I put it in it still wont work i tried using different types of cheats like action replay and code breaker and gameshark and it still wont work any idea why.

    Reply

    • Hey Kiki! Could you tell me which cheat you’re looking to use and what version of FireRed you have? If you’re on V1.1, make sure to pick the cheats for that version. But just a heads up, we don’t have many cheats for V1.1 at the moment.

      Reply

68. hey i am using code breaker type pc items cheat and now i cant acced my boxes it says they are full on catching seventh mon and gose just black scrren whenever i am using any pokemon option i am on v1.0 downloaded from visual boy advanced site and can you provide the download link that you guys tested cheats on bcz that would make a lot of us life better with pokede completion who dont have friends for trade and also money of that hell amount to buy offiifcials

    Reply

69. hey i am using code breaker item codes and now i can’t acces my pokemon box’s any mens to make it work

    Reply

70. Because I buy Gameboy advance sp, pokemon firered and gameshark so all I need is mater code for gameshark

    Reply

    • Hello there, Irvin. I recommend using emulators if you wish to make the most of these cheats.

      Reply

      • I’m using gameshark i just need a master code for pokemon firered

        Reply

71. Hey do you have master code for gameshark?

    Reply

72. Hi. I am using an emulator called OpenEmu. I am playing Fire Red. I don’t know if it the rom I’m using is 1.1 or 1.0. I tried to use both versions for the Pokemon Modifier. I used all of the right Master codes, along with the right normal codes. I’ve been putting the Masters codes first, as a separate code. It seems like all the code is doing is making Wild Pokemon attack more often, compared to when the code is not activated. I want to catch Lapras and Eevee on route one. What am I doing wrong?

    Reply

    • Hey shyblueliard, if you wish to make the most of these cheats, I recommend switching to mGBA. OpenEmu is a good emulator, but unfortunately it has limited cheating capabilities.

      Reply

73. Do these cheats also work for authentic cartridges with a physical game shark, or are these only for emulator?

    Reply

    • Hey Clover, these cheats were tested well on emulators, but I believe they can also work on authentic cartridges using a physical GameShark, as long as the codes match your game version and your GameShark model supports it.

      GameShark works by modifying game memory in real time, but compatibility depends on:

      • Game version (e.g. FireRed v1.0 vs v1.1)
      • GameShark model (some older models have limitations)
      • Accurate codes (wrong codes may crash the game or corrupt saves)

      Hope this answers your question.

      Reply

74. Trying to use some cheats on a Rom Hack named Throwback FireRed (based on FR1.0), and Gameshark cheats works perfectly, but Code Breaker doesn’t work. I’m trying to get Raikou wild encounter to avoid the mindless grinding to find him. I tried both 1.0 and 1.1 master codes, they either do nothing (normal wild encounters) or are invalid (emulator says it’s not a valid code. Trying to split up also doesn’t work, it only recognizes the second half, it says “invalid code” for 000014D1). I also tried some GameShark codes from another site and they also didn’t work (either wild encounters get a black screen with normal sounds but no response) or freeze the game when I enter the tall grass.
    I’m using JohnGBA full on android. Any tips to make it work or is it bugged because it’s a romhack?

    Reply

75. Pokemon modifier master code doesn’t work

    Reply

    • Hey Jay, thanks for dropping by! I can confidently say the Pokemon Modifier cheat does work—it’s been manually tested by me, and I’ve even included screenshots as proof. Just make sure you’re using the correct code for your version of FireRed. If you’re playing on FireRed v1.1, be sure to activate the Pokemon Modifier cheat specifically made for that version. Let me know if you have more questions.

      Reply

76. I used the cheat code in v1.0 for the mewtwo wild encounter .
    I disabled it and entered the one for artícuno wild encounter now it keeps freezing when I go to encounter wild Pokemon .

    I’m playing Pokemon fire red team rocket and edition .

    All other codes are working fine ,
    Rare candys
    Money
    Masterballs etc …

    Reply

77. is there any way to get dratini using the pokémon modifier cheats? i keep getting crawdaunt when i put in 147, am i doing something wrong?

    Reply

    • Hey Jake, make sure you’re using the correct Master Code for your version of FireRed. I’ve provided codes for both v1.0 and v1.1, so be sure to select the one that matches your game version. I’ve also updated the cheat info to make things clearer. Let me know if you need any help!

      Reply

78. I’m playing both versions, but I’m mostly playing on the 1.1 version of the game, because of the cheat code Max iv for starters, the problem is I don’t know how it works, for example I tried using the code for Pokemon received Max Iv, but the thing it seems to not work, because somehow a lvl 5 Squirtle is faster than my Charmander.
    Btw this was the cheat code I use:)
    1003DAE6 0007
    83007D4E 0ZZZ
    33007D50 00YY
    33007D51 001F
    Btw I’m not angry:)

    Reply

    • nah dude iv diffrence ain’t too much on lower lvls it starts at what like after 10 showing and also evs matter

      Reply

79. Hello is there one to get the national Pokédex ?

    Reply

80. Hello I Have a couple of question. I’m playing on iOS with Delta Emulator, How I can check my rom version?
    Then I tried all the codes for all the version for wild and legendary encounters but they aren’t working. It actually only modify the level of the wild Pokémon that I find but not the Pokémon I choose to encounter

    Reply

    • Hey Antonio, thanks for stopping by! Most FireRed versions you find online are V1.1, so if a lot of these cheats don’t work, you probably have V1.1. If that’s the case, check out our collection of cheats specifically for V1.1. There aren’t many, but the ones we have are pretty useful. Hope that helps! Let me know if you need more info.

      Reply

81. Hey Admin!

    Its it okay if i want to know what Rom u using?
    are u using mobile or pc?

    most of the code doest work at all if using pc. can u provide the rom download so we also can use it aswell.

    Reply

    • Hey Ahjin, most of these cheats work best with FireRed V1.0 and the FireRed Squirrels version—those are the versions we usually use for testing. There’s also FireRed V1.1, and while we do have a few cheats for that version, they’re still quite useful. These cheats should work on most emulators, whether you’re on mobile or PC, as long as you’re using the correct FireRed version. Let me know if you need any more help!

      Reply

82. Is there a cheat for music? like every battle, Red theme’s will play

    Reply

    • I never encounter cheats for music on GBA games, sorry.

      Reply

    • yes i found out how to start music.
      but what did you mean with Red theme?

      cheat code for the Music ID
      hold Start + Up to set the Music ID
      replace xxx with the Music ID (12B = champion theme for example)
      73003118 0048
      83000FC0 0xxx

      cheat code to start the selected music
      hold Start + Down to start it
      73003118 0088
      83000FC4 0001

      Reply

83. Hey is there a code for no trade evolution in fire red on myboy

    Reply

    • Hey Ahmad, sorry but we don’t have the cheat at the moment.

      Reply

    • you mean that Kadabra doesn’t evolve to Alakazam on trade?
      then give him a everstone before.

      Reply

84. is there a cheat for to trade evolution for fire red?

    Reply

    • We don’t have that cheat yet, Cire. Sorry about that.

      Reply

    • can you explain a litte bit more what you try?

      Reply

85. The shiny cheat would be better if it didn’t treat the pokemon as a traded one. The player ID won’t match your own so it will level up faster just like any other traded pokemon and very quickly level up past the level cap for obedience if used early game

    Reply

    • Hey Jester, thanks for stopping here. There are two versions of the shiny cheat, and each has its own drawbacks. Unfortunately, these are the only codes available at the moment. I’ll surely post whenever I discover a better one.

      Reply

    • Use the ‘All 8 Badges Cheat’ and the shinies will obey. I tried it because the same thing was happening to me; it works!

      Reply

86. Hey, is there a cheat code to evolve Haunter???

    Reply

    • I normally use the encounter for gengar at the same level the haunter is when I want to evolve him

      Reply

    • one way to do that is changing the settings in the rom with cheat codes or directly:

      in fire red 1.0 the Evolution stuff is on this raw type address
      0825A5DC
      this address show the data of pokemon ID 0

      offset 0x0 = Evolution Methode
      Values are:
      0004 = Level Up
      0005 = Trade
      0007 = Item

      offset 0x4 = Evolution Argument
      if you use Level Up then enter the level here
      if you use Trade then set 0
      if you use an item to evolve then enter a item ID what can evolve pokemon (Waterstone for example)

      offset 0x8 Evolution Species
      here you can enter in which pokemon your target pokemon evolve

      ok how to do this now.
      in your example you have Haunta and you want to change the evolution data from trade to level up for example:

      default data on Haunta:
      offset 0x0 = 0005 (trade)
      offset 0x2 = 0000
      offset 0x4 = 005E (Gengar)

      new data on Hauta should be:
      offset 0x0 = 0004 (level up)
      offset 0x2 = 0020 (level 32 example) (you can choose any level you want)
      offset 0x4 = 005E (Gengar)

      the class size for one pokemon is 0x28 (in Hex)
      this means if you want to edit Hauta’s evolution data then you have to use his Pokemon ID number (0x5D) (in hex) to jump to his address.
      means 5D * 28 = E88
      0825A5DC + E88 = 0825B464

      0825B464+0 = 0825B464 = Offset 0
      0825B464+2 = 0825B466 = Offset 2
      0825B464+4 = 0825B468 = Offset 4

      if you want to make a raw cheat code (this is not a code breaker) then you can do this now.

      0825B464 0004
      0825B466 0020
      0825B468 005E

      Reply

    • get a second game game if you are on gameboy get both versions enjoy it fully with using link local

      Reply

87. Hey, can anyone help me on how to use the max iv cheats pls.

    Reply

    • Hey Ken, thanks for stopping by! Are you having trouble activating the Max IV cheat? Just a quick reminder—it’s a CodeBreaker type cheat and requires the Master Code to work properly. After activating it, you’ll need to catch a Pokemon in the wild, and it should have Max IVs. Let me know if you need help activating the cheat!

      Reply

      • Yes please, teach me how to activate the code:)

        Reply

        • May I know which GBA emulator you’re using? If it supports CodeBreaker cheats or can auto-detect cheat types, there shouldn’t be any issue activating them.

          Also, double-check your FireRed version—if you’re using v1.1, that’s likely the main reason the Max IV cheat isn’t working. Most of our cheats listed here are for v1.0 or the Squirrels version, and only a few are confirmed to work with v1.1. Let me know, and I’ll try to help you further!

          Reply

88. Hello PC!
    Im trying to run the cheat code for shiny pokemon encounters yet it seems to not be working on my end. My friend got his to work but mine seems to be having a little trouble, im hoping you could help?

    Im using the John GBA lite emulator.
    I tried to cheat code on both versions of fire red. (v1.0 and v1.1)

    Thank you! Judee

    Reply

89. Hello PC. Im having trouble trying to run the shiny pokemon cheat on my fire red (i tried v1.0 and v1.1)
    I’ve did all the steps
    Placed the correct type of cheat.
    Double checked the code to check for mistakes.
    Waited a reasonable amount of time.
    Yet it still doesn’t work.
    Im using the John GBA lite emulator.

    Please assist me as I’ve been trying to solve this issue myself yet found no luck

    Reply

90. I tried the wild encounter modifier and it doesn’t work and put in both of the master codes too still nothing idk what to do about it

    Reply

91. I found a wild pokemon mod that works for v1.1 btw. It takes 2 master codes though.
    Encounter Mod MasterCode 1
    3AF85ACA C4D18CEC
    8E883EFF 92E9660D

    Encounter Mod MasterCode 2
    4D83B1BF E0F5F507
    8E883EFF 92E9660D
    B6C5368A 08BE8FF4
    90B4977C C0151DC2

    Pokemon
    83007CEE YYYY
    (Enter Pokemon code where YYYY is. Ex. Charmander 0004, Pikachu 0019)
    When you encounter the Wild pokemon then you turn off the cheat before you throw a poke ball or it’ll be stuck on a black screen.

    Reply

92. In the Pokemon FireRed Cheats: For Version 1.1 section the Macho Brace and Exp Share codes for the Action Replay are the exactly the same.

    Reply

    • Hey Todd, the code was actually only for Macho Brace. I appreciate you for checking the code and giving me a heads up on the issue.

      Reply

93. I was trying to walk through walls,I have the master code and the actual thing,it’s in code breaker,and I made sure my other cheats were off! I’m on delta so maybe that’s why

    Reply

94. Version 1.1 the code for EXPshare gives MachoBraces.
    is there a working code for ExpShare?

    “MachoBrace
    C97D9DA7 36CABCD0

    ExpShare
    C97D9DA7 36CABCD0”

    Reply

    • Exp Share
      97769EC7 5402004A

      Reply

95. I activated the shiny code, and it worked! I found a shiny, but now I can’t disable it. I already deleted the code, but only shiny Pokemon keep appearing.

    Reply

    • Hey DraxyGT, make sure the shiny cheat or any other cheats are disabled. Then, save your game progress, restart your emulator, and reload your game. This should help clear any cheat effects and restore everything back to normal. Hope this helps!

      Reply

96. Hello,
    I am using a launcher called John GBA Lite on mobile, and I can’t seem to get any of the codes to work. Any reason?
    Thanks

    Reply

    • Hi Arnob, just a heads-up — FireRed has two versions: v1.0 and v1.1. Most cheats are for v1.0, while v1.1 has fewer working cheats available.

      If a cheat isn’t working, double-check your game version. For v1.1, make sure you’re using cheats specifically labeled for that version. If you have v1.0 (or the popular Squirrels version), most cheats labeled for v1.0 or no label at all should work without issue.

      Also, make sure you’re adding the cheat under the correct cheat type (e.g., CodeBreaker, or Action Replay/GameShark). If you’re using John GBA Lite, cheats should work smoothly as long as they’re entered correctly.

      Hope this helps, feel free to ask if you run into any more issues!

      Reply

97. wild pokemon mod isn’t working I entered the code for nidoran male but Im not getting a nidoran

    Reply

    • Hey Phoenix, if you could provide more details about your issue, I might be able to help you better.

      The Wild Pokemon Modifier cheat has two versions — one for v1.0 and one for v1.1. Make sure you’re using the cheat that matches your game version. Additionally, ensure you’ve added the cheat under the correct cheat type (e.g., CodeBreaker or Action Replay), as using the wrong type can prevent the cheat from working properly.

      Let me know what version and emulator you’re using, and I’ll do my best to guide you from there!

      Reply

98. My Pidgey turned into a bad egg when I used Inf money cheat.

    Reply

    • I believe other cheats might be enabled alongside the infinite money cheat, which likely caused the glitch resulting in a Bad Egg. Here’s what I suggest:

      1. Deposit the Bad Egg into a PC box.
      2. Turn off all cheats except for the infinite money cheat.
      3. Check if the infinite money cheat works — if it does, turn it off too.
      4. Save your game using the in-game save option (not save states).
      5. Exit your game and restart your emulator to clear any cheat effects.
      6. Reopen your game, that’s it!

      This should help reset things and prevent further glitches while keeping the inf money effect. Hope this helps.

      Reply

99. The new wild pokemon mod for v1.0 gives me the correct PokéMon at the correct level, but the gender and nature sections of the code don’t work. Additionally, the individual gender mod and nature mod don’t work.

    Reply

100. I can’t seem to get the Wild Pokemon Modifier (For FireRed V1.0) (Cheat type: Code Breaker)
     To work and I have methodically checked everything is correct and for the correct version to. I’m using the Delta emulator to play. I also have RetroArch and have the same issue. Any help with getting it to work would be greatly appreciated

     Reply

     • Hey Malky, thanks for stopping by! Have you tried using the Wild Pokemon Modifier cheat for FireRed V1.1? You might have FireRed V1.1, as it’s the most commonly shared version online. I also use Delta, and these cheats work perfectly on this emulator. Just make sure the Master Code is enabled along with the Pokemon code. Let me know if this helps!

       Reply

       • I tried the codes for both versions and neither worked. The 1.0 set of codes for wild pokemon crashed my device. I lost 30 pokemon and 2 gym badges (my fault for not saving)

         Reply

101. Hey idk if it’s just me but I can’t get the new wild Pokemon cheat to work, I’ve tried other things & they work just fine… but I’m just wondering when I use the new wild Pokemon cheat is it a specific spot I’m supposed to catch the Pokemon or can it be anywhere

     Reply

     • The Wild Pokemon Modifier cheat can work anywhere in the wild. You can try using the sample cheat to see if you encounter a male level 10 Charizard with modest nature. Also, make sure to follow the instructions provided.

       Reply

       • Yeah it’s not working on delta emulator for some reason I put the master code first then the example charizard & nothing I’m just getting regular Pokemon pop up

         Reply

         • Hey Chris, apologies for the confusion! I realized I forgot to label the “Improved Wild Pokemon Modifier” cheat properly. It only works for FireRed V1.0, not V1.1. I’ve updated the cheat with the correct information. If you have V1.1, you’ll need to use the Wild Pokemon Modifier specifically for that version and not the improved one. Sorry about that.

           Reply

           • Oh okay I understand but now I’m having issues with that one every time I try catching the Pokemon the screen goes black, sorry if I’m bothering & I appreciate the help

           • This goes with the last comment I left I figured it out before doing anything I had to turn the cheats off then it let me catch the Pokemon

           • A black screen usually happens when your emulator struggles to handle changes caused by enabled cheats. To avoid this, it’s best to activate only one cheat at a time. If you’re experiencing this issue, try exiting the game, restarting your emulator, and reopening the game to reset any applied settings and cheats. Let me know if this helps.

102. how seee wat verson fire red I’m on also I play on Chromebook!

     Reply

     • It’s hard to tell unless the game’s file name specifies the version. Try using the cheats for V1.0 first. If they don’t work, switch to the V1.1 codes. We don’t have as many cheats for V1.1, but the ones available are definitely useful.

       Reply

103. Hey Guys This Is Another Walk Through Walls Cheat That Doesn’t Need A Master Code:
     167DCBA7 F604FFD2
     78DA95DF 44018CB4

     Reply

     • Hey Migz, I tested the cheat you shared, and I can confirm that it works perfectly on FireRed v1.1 and indeed no need for master code. Thanks for sharing! I have added the cheat above with your credits.

       Reply

104. Why Wild pokemon Modifier is not working T-T Im playing on 1.0 for sure. When I go into grass only normal Pokémon’s are spawning. Infinite candy’s works fine, 1 hit ko too but modifier is not working for me sadly.

     Reply

     • Hi there, Berta33. If the Infinite Rare Candy and One-Hit KO cheats worked for you, then the Wild Pokémon Modifier should also work. Keep in mind that the Wild Pokemon Modifier cheat for V1.0 is a Code Breaker type cheat, and the master code must be added as well.

       Reply

105. Shiny cheat doesn’t work??

     Reply

     • Hi Damien, I’m sure that the shiny cheat does work. Unless you have FireRed V1.1 (I recommend using FireRed V1.0 or Squirrels’ version) or a FireRed-based ROM hack game that doesn’t work on the shiny cheat.

       Reply

106. Egg hatch doesn’t work for fire red 1.0 on Delta emulator

     Reply

     • I’ve added an alternative code, feel free to test and I appreciate your feedback.

       820285C6 00FE

       Reply

107. hello pokecoder can you please put a link to the rom because I done know how to install it

     Reply

     • Hi James, I apologize, but we don’t share ROM files here as it’s illegal to distribute such files. However, you may be able to find them elsewhere online. Thank you for your understanding!

       Reply

108. Every time I use the shiny Pokémon code, it always give me Bold Nature. How do I fix it?

     Reply

     • Unfortunately, there’s no way to change the nature of an existing Pokemon or modify the nature of a Pokemon obtained using the shiny cheat. However, you can use the improved version of the Wild Pokemon Modifier cheat for FireRed V1.0 to set the nature. gender, and level of wild Pokemon before catching them.

       Reply

109. Fast hatching isn’t working on v1.0
     I’m using myboy full version.

     Also, Shiny pokemon (1st code) works but any pokemon caught fail to apear in your part or the PC.
     Alternate cod works, but you’ll have to change the pokemons name.

     Reply

     • For the fast hatching cheat, make sure the master code is added first and then fast hatching code. Also, ensure that the cheat type is set to Code Breaker. For the shiny cheat, make sure to capture them and it should appear in your party. If you receive a glitchy name Pokemon, we have provided a guide for that which you can find here, How to Fix Shiny Pokemon Name Glitch When Using Cheats.

       Reply

110. I am playing Leaf Green on a handheld emulator and after defeating the Pokémon league, where the original game automatically saves and takes you back to Pallet town, I get a saving error (I have been in state saves, rather than in game). Is there a way to get around this?

     Reply

     • Sorry, Callum, but I believe there’s no workaround for your issue. This is why I always recommend my readers use in-game saving instead of save states.

       Reply

111. Good evening, when I use the cheat to capture the opponent’s Pokémon, it results in a bad egg. How can I avoid getting a bad egg?

     Reply

     • Hi Christian, before throwing a Pokeball, ensure you press L and R. Also, when using the cheat, make sure it’s the only one enabled. Please note that this cheat is known to give a bad egg. You can deposit the bad egg in the Box located in the PokeCenter.

       Reply

     • Turn on the cheat before you start the battle….. also make sure your using firered v1.0
       Use this link.
       Don’t download any version with “rev” = v1.1 (you don’t want that)

       Reply

112. My game keeps crashing every time I try to open the TM Case. I don’t know which cheat is causing the problem. The TM Case only works if I get an HM. Even then, only the HM appears, and all the TMs are gone. Has anyone else experienced the same issue? I’m using Pizza Boy Pro and MyBoy, and both crash whenever I open the TM Case. The cheats I’m using are:

     Steal other Pokémon
     Rare candy in Pokémart
     All Pokémart items only $1
     Infinite PP
     Infinite money
     Pokémon level modifier
     Easily catch Pokémon

     Reply

113. 95EDFBBA A5A72A78
     C833D1A0 02FA7205

     code for 1 hit kill i personally verified it and it works on both fire red and ashgray.

     Reply

     • Hey Reiii, thank you for sharing this information to us.

       Reply

114. Can’t get the money cheat to work on delta don’t know if I’m doing it wrong or not please help.

     Reply

     • Hey Christian, is this your first time applying cheats to your FireRed game? First off, make sure the cheat is added to its correct cheat type, and if a cheat requires a master code, make sure it is also added. Additionally, if you have FireRed v1.1, then most likely only a few of these cheats will work for you. I suggest looking for V1.0 or the squirrel’s version of FireRed.

       Reply

115. Can you add a new cheat code named “IV modifier”? I just need to use that for hidden power.

     Reply

116. The walk through walls code doesn’t work on my pizza boy A but i used this instead:

     167DCBA7 F604FFD2
     78DA95DF 44018CB4
     509197D3 542975F4
     78DA95DF 44018CB4

     Reply

     • Hello Mimie. So, did this cheat work for you? Let’s gather feedback from fellow FireRed players who’ve tried this cheat code.

       – Has anyone here tried this cheat for walkthrough walls? Did it work for you? We’d greatly appreciate any feedback you can provide.

       Reply

117. Does all of this cheats work all in Pokemon 1.0? If it is then,I will download it!

     Reply

     • Yes, cheats work best on the original FireRed version, V1.0. There’s also another FireRed version called Squirrels, and cheats work in that version as well.

       Reply

118. why that nature code didn’t work when i turn on shiny code??

     Reply

119. It tells me that codes may be for a different games.

     Reply

     • That’s perfectly fine, just ignore the message proceed activating the cheat.

       Reply

120. I am stuck in safari zone mode, everytime I get into a battle with a wild pokemon it automatically puts me in a battle with only safari options (ball, bait, rock, and run). I have multiple cheats on so i’m not sure what cheat it was, the newest cheats I put were the shiny codes and badges codes (both didn’t work). I haven’t even reached the safari place either.

     Reply

     • Hey Raylee, I suggest avoiding activating multiple cheats simultaneously. Doing so can definitely cause glitches and freeze your game.

       Reply

121. Do you have the ID of these Pokemon Garchomp Greninja and Golurk

     Reply

     • These Pokemon are not found in FireRed, unless you are playing a particular firered based rom hack.

       Reply

       • How to I find pokemon ID numbers?

         Reply

         • Check the Pokemon ID’s (highlighted in blue) section under the “Pokemon Related Cheats”.

           Reply

122. Where is the code for the mega stone

     Reply

     • There’s no mega stone in FireRed game, perhaps you are referring to a rom hack?

       Reply

123. Hi mate awesome codes I was wondering if I could get a list of all the pokemon codes for wild encounter thanks in advance

     Reply

     • Hi there, check the Pokemon IDs (Blue-colored) to see all the Pokemon id codes.

       Reply

124. I’ve been playing XONE, Pokemon FireRed v1.1, Codebreaker for a few days now. This is my first time playing with an emulator so I know I have a lot to learn still.

     I got the cheats for infinite TMs and Items working, but I’m having trouble with the cheats for the Wild Pokemon Encounters. I’ve double checked everything multiple times, used the PokeDex and Pokecoders ID codes, but nothing is working even though it seems everything is inputted corrrectly. The exact sequences I have saved are listed below.

     I’m trying to get an Eevee – I don’t care if it’s modified or not, but if the modified works then Female, Lvl 10, Jolly Nature. I’ll move on to the rest of my list once I have Eevee’s code figured out.

     I’ve tried the original V1.1 cheat (that’s the cheat labeled original) and it has a tendency to freeze the game after I beat the opposing Pokemon. I’ve also tried the V1.1 modified cheat – it doesn’t seem to affect the game, it just fails to spawn in Eevee.

     Pokemon Encounter Master:

     000014D1 000A

     1003DAE6 0007

     Eevee Encounter Original:

     83007CEE 0085

     Eevee Encounter Modified:

     83007CEE 0085

     33007CF0 000A

     33007CF1 001F

     33007CF2 0001

     33007CF3 0017

     My process is to double check both the master code and the version code are inputted correctly, make sure no other cheats are also turned on, turn the Encounter codes on, find some tall grass and trigger an encounter. Every time, the Pokemon is one native to the route and not an Eevee.

     I don’t understand what I’m doing wrong. I’ve checked the codes multiple times, they seem to match with the article‘s instructions, and other players have gotten them to work, so I’m sure the problem lies with me but I can’t figure out where. It’s been frustrating. I paid to use cheats so I don’t want to quit playing, but this was the main reason for me paying for the cheats and is my favorite way to play.

     Any help would be greatly appreciated!

     Reply

125. Are there any cheats for recharged pink there?

     Reply

126. Can u plz help me get rid of some key items from my bag in Pokemon fire red v1.1 plz

     Reply

127. Hello PokeCoder. I am using version 1.0 on Delta. After catching a Pokemon with wild Pokemon mod, when looking at the Pokémon’s summary screen, game freezes every time. I have turned off all cheats, deleted, restarted, and nothing has worked. Any ideas to fix this? Thank you

     Reply

128. Hey thank you for the codes! What I’ve tried so far are the rare candy and masterball that works really well. My problem is getting the 3 starters. Im using mGBA and Fire Red 1.0. Not sure what Im doing wrong. Please help.

     Reply

129. Im having an issue with the shiny cheat. Every pokemon has the nature Rash. Even when using the Pokemon Modifier cheat the nature will always be rash. I play on V1.0 ofc and all cheats work perfectly fine.

     Reply

     • also having this issue but with Calm nature, any feedback is appreciated

       Reply

130. what type is fast egg hatching?

     Reply

     • That’s a Code Breaker cheat type.

       Reply

131. Why inf money doesn’t work?

     Reply

     • We have 3 versions of the infinite money cheat available. Choose one and add it to your emulator. If the code doesn’t work, try another one. Just be sure to select the correct cheat type. Hope this helps!

       Reply

       • No they still don’t work

         Reply

         • In that case, you might have the v1.1 FireRed version. Unfortunately, we don’t have an infinite money cheat code for v1.1 yet. But rest assured, we’re always searching and testing new codes. If we find a working one, we’ll be sure to update this page.

           Reply

132. does this work on open emu?

     Reply

     • I don’t recommend using OpenEmu if you wish to use cheats. Don’t get me wrong, OpenEmu is an excellent emulator for Mac OS, but its cheating feature isn’t fully supported. I recommend switching to mGBA as this works well with cheats in my experience as Mac user.

       Reply

133. Is there a code that helps change the first purchase item in a pokemart to whatever item you want instead of infinite in pc? To avoid gliching the game with too much stock.

     Reply

134. For the new improved wild Pokemon modifier, how do I make it a level 100 Pokemon instead of a level 10 one? The old wild Pokemon modifier doesn’t work but this one did, but I can’t figure out what to put to give me level 100 wild mons.

     Reply

     • I’ve made an update to the cheat and added the code equivalent for all nature and Pokemon level. For level 100, use the code 64. Let me know if this works for you.

       Reply

135. I’m playing on the myboy emulator and I can’t get the infinite masterball cheat to work. I know I’m on version 1.0 because I used the infinite money cheat. Is there a master code I’m not seeing here?

     Reply

     • There’s no master code, simply add the code, go to your PC and withdraw the master balls.

       Reply

136. Hi, im playing on the Delta Emulator and all the catched Pokémon with the shiny cheat on do not obey (shiny starter included), is there a reason for this Problem ?

     Reply

     • That’s odd. Are you playing a ROM hack? After using the shiny cheat, disable or completely remove the cheat from your emulator. Everything should return to normal, and hopefully, those Pokemon that are not obeying will start to obey as well.

       Reply

       • I’m playing on the 1.0 standard Rom, disabling the cheat didn’t change anything for the shiny pokemons, but the ones caught without the cheat are working fine, thanks for the help!

         Reply

         • Good for you. In some emulators, the shiny cheat may remain active even after being disabled, but restarting the emulator should resolve the issue. However, based on your statement, it seems everything is working fine even the emulator is not restarted.

           Reply

           • For the improved wild modifier what’s the code for Hasty nature?

           • For the Hasty, use the code 15. Great news, I’ve made an update to the cheat and added the id codes for Pokemon level and nature.

137. Infinite PP cheatcode doesn’t work with Pokemon Fire Red. Suggest to remove it. its misleading.

     Reply

     • The cheat works for us and to many other players, Jidin. Unfortunately, many of these cheats do not function correctly on the V1.1 version, which might be the version of FireRed you have. I recommend looking for the V1.0 version or the Squirrels version, as these versions of FireRed are more compatible with cheats

       Reply

138. Is there a solution for fixing pokemon not evolving when they are supposed too? So like totadile or mudkip won’t evolve if I cheat them in at the beginning of the game. Any answers for this would be helpful

     Reply

     • Try battling them in the wild and gain experience to increase their level, the Pokemon will then evolve. Let me know if this works for you.

       Reply

     • You have to beat the game before the next gen Pokémon will evolve.

       Reply

139. When I was using the Pokémon modifier for fire red 1.1 when I tried to throw a pokeball the screen would go black and not work

     Reply

     • Hello, Jacob! It’s possible that there are additional cheats enabled in your emulator, which may have caused the game program to become confused and resulted in a black screen. As I always advise my readers, it’s best to enable only one cheat at a time and promptly disable them once they are no longer needed.

       Reply

140. i am using an abernic rg35xx so and the codebreaker codes don’t work like the master ball and the rare candy but the exp share one does and that doesn’t say codebreaker near the code so can someone please help?

     Reply

141. I was wondering for the updated modifier 💥 is that code breaker or GameShark

     Reply

     • Sorry for the confusion, but the cheat is a codebreaker cheat type. Codebreakers typically consist of 12 characters per line while Action Replay/GameShark has 16.

       Reply

142. No matter what, all I can seem to get is modest nature on my wild pokemon.

     Reply

     • To change the nature or even gender of a Pokémon, you need to restart your game and use the cheat again.

       Reply

143. Meh. the tms & hms and infinite items in PC (the ones with 82025840 XXXX) doesn’t work at all.

     Reply

144. Where can I find the pokemon codes (ids) I’m having trouble finding them as they are not in sequence so I can have them all if you can help with this on (master code of perfect Ivs) pls

     Reply

     • The pokemon code id’s is at the top highlighted with blue. Just click the accordion and it will reveal all the codes. I believe it’s clearly visible.

       Reply

       • Hey, where can I get the different codes for the nature when using the Wild Pokemon Modifier (💥Improved)? I would like to change it from being modest.

         Thanks

         Reply

         • I’ve made an update to the cheat and added the equivalent code id’s for Pokemon nature and level. Please check it again, hope this helps.

           Reply

145. I’m having issues with either shiny cheat I have version 1.1 which is probably why, is there an update to that cheat? The getting all three starters one works in 1.1 as does the infinite money and rare candies/masterballs in the pc but not that one.

     Reply

     • Hey Adam, sorry but the shiny cheat does not work on v1.1. We haven’t found the code yet for the version yet, but we have working codes for Wild pokemon modifier that you might want to check.

       Reply

146. I would like to get help on activating the Gangar cheat code on Pokémon Fire Red. Am using the iPhone Delta app. I tried inputting the code and saving it ( 83007CEE 005E) unfortunately it didn’t work and I would like some help please.

     Reply

     • Thanks for coming here, Antonio. First, determine the version of your FireRed rom. If it is a V1.0 or the squirrels, use the cheat
       Master code (Code breaker)
       000014D1 000A
       1003DAE6 0007

       Gengar cheat code (Code breaker)
       83007CEE 005E

       Or if you have v1.1, then use the cheat code
       MASTER CODE 1 (Add first in a separate cheat as Action Replay)
       3AF85ACA C4D18CEC
       8E883EFF 92E9660D

       MASTER CODE 2 (Add also this in a separate cheat as Action Replay)
       4D83B1BF E0F5F507
       8E883EFF 92E9660D
       B6C5368A 08BE8FF4
       90B4977C C0151DC2

       Gengar cheat code (Code breaker)
       83007CEE 005E

       Hope this helps.

       Reply

       • the shiny pokemon cheat codes do not work in delta, any help ?

         Reply

         • May I know which FireRed version you are using? Unfortunately the cheat won’t work on V1.1. You need FireRed V1.0 or the squirrels version to make these cheats work. Although we have some few cheats working on v1.1 but for Shiny, it doesn’t work on v1.1.

           Reply

       • It does not work in 1.1… I have been trying to get a gengar in delta, but it’s seems to be impossible :(

         Reply

         • Please check the latest updated version of the cheat in the official list of cheat codes above.

           Reply

147. Hello, thanks for the codes!
     Working very well in delta for iOS!!
     Im having trouble modifing the nature of wild encounter. In the example of charizard, i always got a lonely nature, using the same code for a dragonite i always got quiet nature. What i have to do?

     Reply

     • Hi Lucas! Thanks for dropping by. I’m excited to hear that the cheats worked for you in Delta. Right now, the cheat will give you a fixed nature, but I’m working on improving the cheat. Stay tuned for some exciting updates!

       Reply

148. The cheats are not working on Delta. I do not know the version of Pokémon Fire Red, would you be kind enough to help me ?

     Reply

     • Certainly! You will need a FireRed v1.0 or FireRed Squirrels version. These versions work well with cheats and offer exceptional performance. Unfortunately, we currently have only one cheat available for version v1.1.

       Reply

       • Hi. I searched for some time and now im already playing for few months.

         I had a problem with cheats. Because Fire Red 1v1 version cheats are different. But after few hours i found the combination. I found this Mater code for FR 1V1 version

         4D83B1BF E0F5F507
         8E883EFF 92E9660D
         B6C5368A 08BE8FF4
         90B4977C C0151DC2

         Reply

         • Hi Robo, great news! We’ve just finished improving the list of codes and added bunch of cheat codes for FireRed V1.1. Check em out!

           Reply

149. Both of the no wild battle codes don’t work for me

     Reply

150. some of the codes for wild pokemon modifiers crash or freeze the game (v 1.1). i’ve tried a few different workarounds and it seems that for example squirtle does not work and automatically shuts the game down. are there any workarounds for this?

     Reply